Ostand Q3 Silicone for iPhone 17 Pro Max

The media could not be loaded.

So I’ve had the Ostand Q3 silicone case for the last three weeks and I’ve handled it, and tried it out using my iPhone 14 ProMax (as the 17 and 14 are close in size), and these are my findings.I like that Torras' retained the use of embedded buttons to help prevent entry points for dust (although I miss being able to pick and choose optional color buttons).I like the feel/texture of the case. It’s a little slippery, but otherwise feels good in my hands. My worry is that over time it might become tacky like some plastics can get and then it becomes sticky leaving residue on your fingers. I have a TV remote control like that. [I have been assured by Torras support since I posted this that that "tacky/sticky" problem won't happen [see next], "We added a nano-coating to the surface: this not only extends the life of the liquid silicone but also keeps the texture smooth (and makes wiping off dirt or fingerprints super easy). And don’t worry about it getting sticky over time—we’ve upgraded our manufacturing process with high-quality liquid silicone. While some plastics or low-grade silicones do turn sticky, our material prevents that, so it’ll stay comfortable to hold for months."I was able to fit my iPhone in the case however as the iPhone 14 Pro Max is slightly smaller than an iPhone 17 Pro Max, it’s not a snug fit. But it’s not terribly loose either [I don't plan on using it full time with my 14 Pro, it was just for testing purposes].Button response (volume and power) are responsive (even with the phone being my 14 Pro Max) was very good.I like the O-ring stand it’s stiff, which is good. I put the stand in a position and the phone retains that angle over time. It doesn’t slip down or fall down, it holds its position.I suggested to the support team they should make note for people that the O ring can only fully go flush with the phone in one direction or the other when you open it up or extend it. That was the only thing I noticed I was like “ok this won’t go that direction", but I get it, it has to be the way that it is because otherwise the stand won’t stay as a stand” and the phone will fall down flat. Think about it like a soda can tab, you pull it up and out and it goes to this like 90° or whatever angle and then it doesn’t go any further. Don’t force it you’ll break it.It’s a good opening for the camera lenses I guess, that being said none of my lenses were blocked so I was able to take pictures with it on, and they were somewhat protected (again because I have an iPhone 14 Pro Max the camera arrangement is different than that of the iPhone 17 Pro Max).I like the fact that the branding is subtle and it’s not overly large (I like that, actually quite a lot). It’s in a good location in my opinion, and I imagine that based on designers input they situated as such so you can still read it to showcase whose brand case it is especially when you have the stand holding the phone up for reading or angled for watching videos.I did note though that the magnet inside the case is not as strong with the heavier weighted 14 Pro Max in securing it to a magnetic surface (i.e. my cabinet door) as seen in the video.You can see that the case and phone slide down the surface of the door which is not a good thing. Now it’s possible that it might work better with the 17 Pro Max (and stay in one place) as that has an aluminum body versus a steel body, but I don’t know, I don’t have one to test with..Overall I like the case, I wish I could have gotten one in black, but I get making it the color it is goes with Apples decision to make a dark blue iPhone Pro Max. I was curious as to the hierarchy of cases between this one and the one with the “air cushion corners” as that seems like it might be more desirable to buyers as it’s got some parts that are clear, and seems to be more rugged to deal with drops (I didn't test my phone and the Torras case in that way as I was sure my phone would pop out).

The media could not be loaded.

So I’ve had the Ostand Q3 silicone case for the last three weeks and I’ve handled it, and tried it out using my iPhone 14 ProMax (as the 17 and 14 are close in size), and these are my findings.I like that Torras' retained the use of embedded buttons to help prevent entry points for dust (although I miss being able to pick and choose optional color buttons).I like the feel/texture of the case. It’s a little slippery, but otherwise feels good in my hands. My worry is that over time it might become tacky like some plastics can get and then it becomes sticky leaving residue on your fingers. I have a TV remote control like that. [I have been assured by Torras support since I posted this that that "tacky/sticky" problem won't happen [see next], "We added a nano-coating to the surface: this not only extends the life of the liquid silicone but also keeps the texture smooth (and makes wiping off dirt or fingerprints super easy). And don’t worry about it getting sticky over time—we’ve upgraded our manufacturing process with high-quality liquid silicone. While some plastics or low-grade silicones do turn sticky, our material prevents that, so it’ll stay comfortable to hold for months."I was able to fit my iPhone in the case however as the iPhone 14 Pro Max is slightly smaller than an iPhone 17 Pro Max, it’s not a snug fit. But it’s not terribly loose either [I don't plan on using it full time with my 14 Pro, it was just for testing purposes].Button response (volume and power) are responsive (even with the phone being my 14 Pro Max) was very good.I like the O-ring stand it’s stiff, which is good. I put the stand in a position and the phone retains that angle over time. It doesn’t slip down or fall down, it holds its position.I suggested to the support team they should make note for people that the O ring can only fully go flush with the phone in one direction or the other when you open it up or extend it. That was the only thing I noticed I was like “ok this won’t go that direction", but I get it, it has to be the way that it is because otherwise the stand won’t stay as a stand” and the phone will fall down flat. Think about it like a soda can tab, you pull it up and out and it goes to this like 90° or whatever angle and then it doesn’t go any further. Don’t force it you’ll break it.It’s a good opening for the camera lenses I guess, that being said none of my lenses were blocked so I was able to take pictures with it on, and they were somewhat protected (again because I have an iPhone 14 Pro Max the camera arrangement is different than that of the iPhone 17 Pro Max).I like the fact that the branding is subtle and it’s not overly large (I like that, actually quite a lot). It’s in a good location in my opinion, and I imagine that based on designers input they situated as such so you can still read it to showcase whose brand case it is especially when you have the stand holding the phone up for reading or angled for watching videos.I did note though that the magnet inside the case is not as strong with the heavier weighted 14 Pro Max in securing it to a magnetic surface (i.e. my cabinet door) as seen in the video.You can see that the case and phone slide down the surface of the door which is not a good thing. Now it’s possible that it might work better with the 17 Pro Max (and stay in one place) as that has an aluminum body versus a steel body, but I don’t know, I don’t have one to test with..Overall I like the case, I wish I could have gotten one in black, but I get making it the color it is goes with Apples decision to make a dark blue iPhone Pro Max. I was curious as to the hierarchy of cases between this one and the one with the “air cushion corners” as that seems like it might be more desirable to buyers as it’s got some parts that are clear, and seems to be more rugged to deal with drops (I didn't test my phone and the Torras case in that way as I was sure my phone would pop out).

For i17pm this product is the best in my opinion. Love the functionality and the material choice of the case feels comfy to handle at all times. Also fit the blue color of the device. It’s easy to install too. The case interior has some fur design that would protect inner edges of device that will protect against improper handling of installation.

For i17pm this product is the best in my opinion. Love the functionality and the material choice of the case feels comfy to handle at all times. Also fit the blue color of the device. It’s easy to install too. The case interior has some fur design that would protect inner edges of device that will protect against improper handling of installation.

Very impressive design and quality. The feel itself is better than my other previous branded case throughout my journey of using Iphone 1 until 17.

After 6+ months of owning this case, I can say that it has stood the test of time & is well worth the price point. The silicone material has proven to be far superior to the material on my previous Apple brand case. The 'Dune Beige' color option flawlessly matches the Desert Titanium color of my iPhone 16 Pro. The camera control feature on the side is one of the most functional that I have seen of the 3rd Party market. The 360 Magnetic ring allows this case to be super versatile when streaming content or propping your phone up for a photo. I highly recommend this case & TORRAS Brand in general, for anyone looking for the perfect mix of functionally, comfort & reliability.

After 6+ months of owning this case, I can say that it has stood the test of time & is well worth the price point. The silicone material has proven to be far superior to the material on my previous Apple brand case. The 'Dune Beige' color option flawlessly matches the Desert Titanium color of my iPhone 16 Pro. The camera control feature on the side is one of the most functional that I have seen of the 3rd Party market. The 360 Magnetic ring allows this case to be super versatile when streaming content or propping your phone up for a photo. I highly recommend this case & TORRAS Brand in general, for anyone looking for the perfect mix of functionally, comfort & reliability.

So quick so beautifull and love it